Forms and the patient portal
Send intake and consent forms, collect the answers on the record, and give patients their own portal.
Clinics run on paperwork: registration forms, consent forms, health questionnaires. In Clinidiary a patient fills these in on their own phone, or on a tablet at the desk, and the answers land on their record. Nobody retypes a clipboard again.
This chapter covers sending a form, what the patient sees, forms on paper, reviewing what comes back, building your own forms, and the patient portal — where patients sign in to see their own appointments and invoices.
Sending a form#
How to send a form#
Open the patient’s record and click the Documents tab.
Click Send a form.
Choose the form in Which form.
- 1The form to send
- 2A QR code or link, at the desk
- 3By email
- 4By text message
- 5Send it
Figure 13.1Send a form. Choose the form, then how it reaches the patient. Under How it reaches them, choose one:
- A QR code to scan at the desk (or a link to copy) — for a patient standing in front of you.
- Email it to the client — choose who replies go to in Reply to.
- SMS it to the client.
Click Send — or, for a QR code, Show the QR code.
At the desk: the QR code#
When you choose the QR code, Clinidiary shows a code for the patient to scan with their phone, or with the desk tablet’s camera.
- 1Scan with the patient’s phone or the desk tablet
- 2Or copy the link
- 3Or fill it in here, now
- The patient scans the code and taps the link that appears.
- Or click Copy to copy the link — for example, to paste into a message.
- Or click Open here — fill it in now to hand your tablet to the patient.
- Click Done when you are finished.
Text messages to patients are not available in India yet, so use the QR code or email.
What the patient sees#
The patient opens the link (or scans the code) and sees a page with your practice’s logo and name, and the name of the form. No sign-in is needed.
- 1Your practice’s name and the form
- 2How far through they are
- 3One section at a time
- The form comes one section at a time. "Step 1 of 2" and the bar show how far through they are.
- They answer each section and tap Next (or Back). If a required answer is missing, the page says what is "Still needed on this page".
- A suburb question looks up the state and postcode; a doctor question searches your directory.
- The last step, Finishing up, asks for Your full name and, if the form asks for one, a Signature drawn with a finger or mouse.
- 1Their name
- 2A signature, where the form asks for one
- 3Send the answers to the practice
- They tap Submit and see a thank-you message — your own wording, or "Your form has gone through" to your practice.
Answers are kept on the patient’s device as they go, so they can come back to the link if they are interrupted.
Forms on paper#
Some patients would rather not use a phone. Print the form with their name on it, and upload the scan once they have filled it in.
On the patient’s Documents tab, click On paper.
Choose the form in Which form.
- 1Choose the form
- 2Print it with their name on
- 3Later: the scan of the filled-in form
- 4File it
Figure 13.5A form on paper: print it now, upload the scan later. Under 1. Print it, click Print the form. The patient’s name and date of birth are printed at the top, with a signature box and an "Office use: received" line.
When the patient hands it back, scan it — one PDF with every page, or a photo.
Under 2. Upload the completed form, click Choose the scan, add who filled it in under Filled in by (optional), and click Upload.
Reviewing returned forms#
When forms are waiting, a blue box appears under the search on the Patients list, and the Patients item in the navigation rail shows a count.
Each row shows the patient’s name, the form and when it arrived. A row marked "on paper" came from a scan; one marked "⚠ needs attention" has a flagged answer. Click Review to open it on the patient’s record.
How to review a form#
Click Review on the Patients list, or open the patient’s Documents tab and click Forms. New forms are marked "new".
Click Open beside the form. (Click Print to print it straight away.)
Read the Needs attention box first: the answers the form flags.
Read the answers. Use the section buttons to jump to a part.
If the form and the patient’s file disagree, a box headed "Check these before marking it reviewed" shows both values. Click Open their details to fix it to correct the record.
Click Mark as reviewed.
The form builder#
- 1Build a new form
- 2Answers that fill the record
- 3Asks for a signature
- 4See it as the patient does
Each form in the list shows its sections and fields, how many answers are mapped (fill the patient’s record), and "signed" if it ends with a signature. Each has Preview, Edit and Archive.
How to build or change a form#
Open SettingsExtensionsForms and click New form, or Edit beside a form.
Give it a name, and tick Available to send so it can be chosen in Send a form and On paper. Tick Ask for a signature if it needs one.
- 1Offered in Send a form and On paper
- 2Ends with a signature box
- 3The sections — the patient sees one at a time
- 4An answer that fills the record
Figure 13.7The form builder. Each section is one page for the patient. Add sections with + Section. Each section is one page on the patient’s phone; drag the section tabs to reorder them.
Click + Add a question and choose the kind of question (see the table below). Or choose a ready-made question from Patient details — "The answer fills the patient’s record."
Click the settings button on a question to set its wording and answer, and tick:
- Required — it must be answered.
- Alert the desk when answered — the answer is flagged as needing attention.
- Fills on the patient's record — choose which detail it fills, or "Nothing — kept on the form".
Figure 13.8Close-upSettings for one question: required, alert the desk, and the record field it fills. Click Preview the form to try it, write the thank-you message under After they submit, and click Save form.
| Question type | Use it for |
|---|---|
| Header | A heading or explanation, with no answer |
| Date, Time, Date and time | When something happened |
| Text — single line / Text — paragraph | Short or long written answers |
| Multiple choice — tick any | Several answers may apply |
| Tick box | One yes-or-no tick |
| Dropdown — choose one | One answer from a list |
| Number, Scale | A number, or a score along a scale such as pain from 0 to 10 |
| Terms & consent | Your wording, with a box to agree |
| Photograph | An optional photo for identification — never required |
The record details a form can fill include the name, date of birth, gender, occupation, email, mobile, phone, address, health insurer or TPA and policy number, emergency contact, referring doctor, family doctor, the alert, and the five consents.
Preview a form#
Click Preview beside any form to see it as the patient does. Try it: nothing typed in the preview is saved.
- 1Nothing typed here is saved
- 2Straight to the builder
The wording of the email and text#
Under the list of forms are The email that carries a form and The SMS that carries a form. Write your own words around the link — drag in details such as the patient’s first name or the form’s name — and click Save. Leave them empty to use the plain default. The link and its expiry are always added for you.
The patient portal#
What a patient can see#
- 1How many patients have access
- Yes: their appointments, past and upcoming — the time, the practitioner and the service. A video appointment has a Join video call button.
- Yes: their invoices — what was charged, what was paid and what is owing.
- Never: their clinical notes.
- Never: anything about anybody else.
How to give a patient access#
Open the patient’s record on the Details tab.
Under Paying and portal, find Portal. It says "No access".
Figure 13.11Close-upPortal access is turned on one patient at a time, under Paying and portal. Check the mobile number on the record is right — the sign-in code is sent to it.
Click Turn on.
How the patient signs in#
- 1The practice’s code
- 2The mobile on their record
- 3A six-digit code comes by text
- The patient opens the portal page and types your Clinic code (it is on their appointment reminder, or they can ask at the desk) and their Mobile number.
- They tap Send me a code. A six-digit code arrives by text message.
- They type the code. The first time, they also give their date of birth, so a phone on its own is not enough.
- They see Your appointments and Your account, and can Sign out when finished.
The sign-in code goes by text message, and text messages to patients are not available in India yet, so patients cannot sign in to the portal. Where your practice has set a UPI ID, a patient can pay an outstanding invoice from the portal by scanning a UPI QR code.
Who has access#
SettingsExtensionsPatient portal shows how many patients have access and how many have signed in, with a list of each patient, their mobile, whether they have used it, and when they last signed in. Click a name to open their record.
Tips and good habits#
- Send the registration form when you book a new patient, not when they arrive. Their details are then on the record before the first visit.
- Map every answer that belongs on the record. An unmapped mobile number is one somebody has to retype.
- Tick Alert the desk when answered only for answers that truly need action, so flags keep their meaning.
- Use the QR code for walk-ins: the patient fills it in on their own phone in the waiting room.
- Clear Forms to review at the end of each day.
- Preview a form on your own phone before you send it to patients.