ClinidiaryUser Manual India Help centre
Every day at the clinic · Chapter 10

Outcome measures and progress

Send and score outcome measures and watch each patient’s progress over time.

PractitionerPractice managerOwner· 17 min read

An outcome measure turns “how is the patient going?” into a number you can compare from one visit to the next. Clinidiary keeps every measure on the patient’s case, works out the score for you, draws the progress as a chart, and puts the numbers straight into your notes and letters.

This chapter covers recording a measure in the clinic, sending one for the patient to answer on their own phone, reading the progress chart, and choosing which measures your practice uses.

12345
  1. 1The case — one folder per problem
  2. 2The Measures part of the case
  3. 3Search every measure by name or body region
  4. 4Record a reading, or send it to the patient
  5. 5History: every reading, charted over time
Figure 10.1The Measures part of a patient’s case: the list of measures on the left, the case’s history on the right, where each reading is charted. This case has no readings yet.

What an outcome measure is#

An outcome measure is a short, standard questionnaire or test with a fixed way of scoring it. Because everyone asks the same questions in the same way, the score means the same thing at the first visit and the last — and to the GP who reads your report.

Clinics use them to:

  • show progress in numbers, not just words (“pain down from 7 to 3”);
  • decide whether treatment is working, or whether to change the plan;
  • report to GPs, specialists, insurers and funders, who often ask for scores;
  • compare a patient with where they started, at discharge.

Some measures are questionnaires the patient answers, such as the Numeric Pain Rating Scale (NPRS) or the Oswestry low back questionnaire. Others are tests you do in the clinic and time or count, such as the Timed Up and Go (TUG). Clinidiary has well over a hundred, grouped by body region.

Each measure in the list carries a small badge that tells you how it can be answered:

BadgeWhat it meansHow you record it
questions built inClinidiary holds the questionsFill it in on screen, or send it to the patient by email, text or QR code — it scores itself
score sheetThe wording belongs to a publisher, so the questions are numbered, not wordedTap what the patient chose on each numbered question of your own paper copy; Clinidiary adds it up
in-clinic testA test you time, count or observeEnter the result
enter totalA measure whose questions are not in ClinidiaryUse your own copy and enter the total

The whole journey of one reading, from a link on the patient’s phone to a report to the GP, looks like this:

1Sentby email or a QR code in the roomMeasures parta link2The patient answerson their phone or the clinic iPad,no sign-inThe patient’s pageanswers3Scoredworked out by Clinidiary themoment they arriveAutomatic4Chartedjoined to the earlier readings,with the change since the lastHistoryprogress5Usedin the next note, a letter to theGP or a case reviewNotes and lettersSentby email or a QR code in the room1a linkThe patient answerson their phone or the clinic iPad, nosign-in2answersScoredworked out by Clinidiary the momentthey arrive3a scoreChartedjoined to the earlier readings, withthe change since the last4progressUsedin the next note, a letter to the GPor a case review5
Diagram 10.1From a link to a progress report — one reading, from the patient’s phone to a letter or a review

The Measures part of a case#

What it is
The list of every outcome measure, with a Record button on each, beside the history of every reading on this case.
Why it matters
Measures belong to a problem, not just to a person — a patient’s shoulder and their back are tracked separately.
Where to find it
Patientsa patientClinical notesa caseMeasures
Who can use it
Practitioners and owners record and send measures. Managers can read them.
Owner½Practice managerPractitioner–Front desk–Accountant–MarketingManagers can read measures and their charts; recording and sending them needs the permission to write clinical notes.

Measures are filed on a case — the folder for one problem, such as “Tennis elbow — right”. Open the patient, choose the Clinical notes tab, pick the case and press Measures.

The list is in three groups, so the measures you use are always on top:

  1. In this case — measures already recorded for this problem.
  2. This practice uses — the ones your practice has switched on in Settings (see below).
  3. Every other measure, by body region (Back, Shoulder, Balance and Falls and so on).

To find one quickly, type a name or a body region into Find a measure — a name, a region.

Each row shows the measure’s range and which way is better — for example 0–10 · lower is better for pain.

Recording a measure in the clinic#

What it is
Entering a measure on this screen — answer by answer, from a paper score sheet, or as a total.
Why it matters
Some measures are done with the patient in the room, and some are tests only you can do.
Where to find it
Patientsa patientClinical notesa caseMeasuresRecord
Who can use it
Practitioners and owners.
Owner–Practice managerPractitioner–Front desk–Accountant–MarketingRecording a measure needs the permission to write clinical notes.

How to record a measure#

  1. Open the case’s Measures and press Record beside the measure. Clinidiary asks How should this be answered? and shows only the ways that suit this measure.

    12345
    1. 1A link by email
    2. 2A link by text message
    3. 3A code to scan in the room
    4. 4Answer it on this screen
    5. 5Type a total added up on paper
    Figure 10.2The ways a measure with built-in questions can be answered.
  2. Choose how:

    • Fill it in here — answer each question on this screen, with the patient or from their paper form.
    • Fill in the score sheet — for a score sheet: tap the number the patient chose for each numbered question of your paper copy.
    • Enter the total — the total is already added up on paper. Only the total is kept.
    • For sending it to the patient instead, see Sending a measure.
  3. If the patient has earlier readings of the same measure in this case, the box Merge with earlier results? is ticked. Leave it ticked so the new score continues the same line on the chart. Untick it to start a new line — for example after an operation.

  4. Check Taken on — the day the measure was taken. It starts as today; change it if you are entering an older score.

  5. Add a Note (optional) if something about this reading matters, such as “after a flare-up”.

  6. Press Save.

    123
    1. 1The total
    2. 2The day it was taken
    3. 3Save
    Figure 10.3Entering a total: the score and the day it was taken. With earlier readings of the same measure, the choice to join them appears too.

Automatic scoring#

You never add up a questionnaire by hand. As soon as there are enough answers, Clinidiary works out the score using the measure’s own scoring rules.

123
  1. 1The score, added up as you tap
  2. 2The day it was taken
  3. 3Save the reading
Figure 10.4A score sheet adding itself up as each answer is tapped. This measure also gives a score for each of its two parts.
  • While you fill it in, the Score updates with every tap. On a score sheet, the line underneath counts how many questions have an answer (15 of 15 answered).
  • Measures with parts show a score for each part as well as the total — here Pain and Function.
  • Some measures still score with a few gaps, where their publisher allows it. The screen tells you how many answers it needs.
  • When the patient answers a measure you sent, it is scored the moment they press Send, and lands in the history on its own.
  • The final score is worked out again when it is saved, from the answers themselves, so the score can never disagree with what was recorded.

Sending a measure to the patient#

What it is
A single-use link that the patient opens on their own phone, or on the clinic’s iPad, to answer the questions.
Why it matters
The patient answers in their own time and words, and nobody has to type the answers in.
Where to find it
Patientsa patientClinical notesa caseMeasuresRecord
Who can use it
Practitioners and owners.
Owner–Practice managerPractitioner–Front desk–Accountant–MarketingSending a measure needs the permission to write clinical notes.

Only measures marked questions built in can be sent. A score sheet, an in-clinic test or a measure where you enter the total is recorded in the clinic instead.

How to email a measure#

  1. Press Record beside the measure, then Email it to the patient. The line underneath shows the email address on the patient’s record.

  2. Clinidiary shows Email it? with everything about to happen: who it is for, the address, what it sends, who it is from, and Reply to — where the patient’s reply goes if they answer the email.

    Send the email is pressed." preserveAspectRatio="xMidYMid meet">123
    1. 1Who it is for, and the address on their record
    2. 2Where a reply goes
    3. 3Sends the link
    Figure 10.5The check before sending. Nothing goes until Send the email is pressed.
  3. Leave Merge the answers with earlier results? ticked to continue the same line on the chart.

  4. Press Send the email. Press Back to change your mind.

How to show a QR code in the room#

  1. Press Record, then Show a QR code, then Show the QR code. Nothing is sent to anyone.

  2. Hand the patient the clinic’s iPad, or let them scan the code with their own phone camera.

    1
    1. 1Open the questions here and hand the device over
    Figure 10.6The QR code works once. When the patient sends their answers, this box says so.
  3. Already holding the iPad? Press Open on this device and hand it over.

  4. When the patient presses Send, the box changes to Answered - the score is in the history. Press Close.

1
  1. 1Cancel the link
Figure 10.7A link waiting for the patient. Call off cancels it so it can no longer be answered.

What the patient sees#

The link opens a simple page made for a phone. The patient does not sign in, and the page never shows their name — only your practice’s logo and name, and the name of the measure.

12
  1. 1Your logo, your practice and the measure’s name
  2. 2Big buttons to tap
Figure 10.8The questions, one under another, with large buttons to tap. (The question wording is blurred in this manual.)
12
  1. 1Nothing has gone yet
  2. 2Fix an answer
Figure 10.9Before anything is sent, the patient checks every answer and can change any of them.
  1. The patient taps an answer for each question. Any question they skip is outlined and marked Still to answer.

  2. They press Check my answers. The page says Check your answers — Nothing has been sent yet. Tap Change to fix one.

  3. They press Change to fix an answer, or Send my answers.

  4. The page says Thank you — Your answers have gone to your practice — and See what you sent shows them a copy. On the clinic iPad, they hand the device back.

History and progress charts#

What it is
Every reading on the case’s timeline, each with a chart of that measure over time.
Why it matters
One look shows whether the patient is getting better, and by how much.
Where to find it
Patientsa patientClinical notesa caseHistoryMeasures
Who can use it
Anyone who can read clinical notes. Correcting a reading needs the permission to write them.
OwnerPractice managerPractitioner–Front desk–Accountant–MarketingEveryone with clinical access reads the charts; correcting or removing a reading needs the permission to write clinical notes.

The History on the right of the case shows notes, measures and letters in date order. Press the Measures chip to see only the measures.

How to read a chart:

  • Along the bottom is time. Gaps between readings are shown as they really were, so a long break looks long.
  • Up the side is the measure’s own range.
  • The highlighted point is this reading; its score is printed beside it (31 / 100).
  • Underneath, the change since the reading before, in green when it is better and amber when it is worse: ▼ 13 since 2026-09-17 · better. A first reading says First reading.

Seeing the details of a reading#

Press the change line under a chart. It opens the measure’s scale, which way is better, who recorded it and any note — and, for a measure that was answered question by question, the answers.

Correcting or removing a reading#

  1. Press Edit on the reading (Correct the date or score).

  2. Change Date taken or Score, then press Save — or Cancel.

  3. To take a reading out of the chart altogether, press ✕ (Remove this reading from the trend).

How measures connect to notes, letters and goals#

A score is only useful when it reaches the people who need it. Clinidiary passes it on for you.

chartedcopied infilled inquotedside by sidefiled inA readingHistorythe chart over timeClinical notesInsert outcomemeasuresDischarge notedates, visits,measuresLettersprogress anddischarge reportsGoalsreviewed beside thescoresThe caseone problem, onefolder
A reading
  • History — the chart over time (charted)
  • Clinical notes — Insert outcome measures (copied in)
  • Discharge note — dates, visits, measures (filled in)
  • Letters — progress and discharge reports (quoted)
  • Goals — reviewed beside the scores (side by side)
  • The case — one problem, one folder (filed in)
Diagram 10.2Where a measure’s score goes — one reading, read by every part of the case

In a clinical note. When you write a note on a case that has measures, a From this case box at the top of the note lists each measure with its first and latest score. Press Insert outcome measures to copy those lines into the note’s outcome or objective box. A discharge note also offers Fill dates, visits, measures and goals.

In a letter. Progress reports and discharge summaries are where scores matter most. The starter progress report asks you to describe progress “measured where possible”; quote the scores from the history.

With goals. Each note on the case reviews the case’s goals (on track, behind, achieved), so the goals and the scores sit side by side. See Treatment journeys, goals and plans.

Choosing your practice’s measures#

What it is
Which measures your practice uses, and the wording of the email (and text) that carries a measure to a patient.
Why it matters
Your practitioners see your usual measures first, on every patient, and patients get a message in your words.
Where to find it
SettingsClinicalMeasures
Who can use it
Owners and managers.
OwnerPractice manager–Practitioner–Front desk–Accountant–MarketingSettings needs the practice-settings permission.
1234
  1. 1One tab per body region
  2. 2Switch a measure on or off
  3. 3How it is answered, and how it is scored
  4. 4Patients can answer this one themselves
Figure 10.10Settings → Measures: one tab per body region, and a switch for each measure.

How to switch a measure on#

  1. Open SettingsClinicalMeasures. The line at the top counts how many are switched on across all regions.

  2. Choose a body region tab. The number on a tab is how many in that region are on.

  3. Turn on the switch beside each measure your practice uses.

The line under each measure tells you how it is answered:

The line saysWhat it means
N questions · email, text or QR code; it scores itself.Patients can answer it themselves (badge patients can answer it)
Score sheet · N numbered questions, filled in at the clinic from the paper copy.A score sheet: filled in at the clinic and added up for you
Done in the clinic · N items, added up for youAn in-clinic test scored item by item
Done in the clinic - the total is entered.An in-clinic test where you enter the result
The total is entered.You enter the total from your own copy
Figure 10.11Close-upA measure patients can answer themselves.

The message that carries a measure#

Further down the page, The email that carries a measure sets your words around the link. The button, the link and how long it lasts are added automatically.

  1. Press Use suggested wording, or write your own Subject and Message.

  2. Drag a detail — such as Patient first name or The measure’s name — into the subject or message, or click in a box and then click the detail.

  3. Check the Preview beside it, then press Save.

1
  1. 1Start from ready wording
Figure 10.12The email’s wording, with the details that fill themselves in and a preview. The patient and practitioner in the preview are made up.

Tips and good habits#

  • Measure at the first visit. A score means little without a starting point to compare with.
  • Use the same measure every time for the same problem, and keep Merge with earlier results? ticked, so the readings form one line.
  • Switch on your usual measures in Settings, so every practitioner finds them at the top of the list.
  • Send it before the visit. An emailed measure answered at home saves time in the room; a QR code on the iPad works for patients who prefer to answer in the clinic.
  • Check the date. When entering an old score from paper, change Taken on so the chart shows it in the right place.
  • Quote the numbers. Use Insert outcome measures in your notes and put the scores in your reports to GPs — it is the clearest evidence that treatment is working.
Clinidiary User Manual · India edition · November 2026Screens shown use an invented demo clinic. No real patient appears in this manual.